Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)

Parece que no hemos podido encontrar lo que estás buscando. Quizá pueda ayudarte una búsqueda.

Foro de Magerit

Respuestas de foro creadas

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)
  • Autor
    Entradas
  • en respuesta a: Metro update v2.7.5 issue #4970
    mike
    Participante

    Muchas gracias, David, that worked.

    The next time there is an update I will try the ‘regular’ updater, but will keep a copy of the legacy one, just in case.

    Mike

    en respuesta a: Metro update v2.7.5 issue #4966
    mike
    Participante

    Okay! After updating the driver for the USB connection, the Updater script could see the port.

    Unfortunately, when I tried finishing the update process, the following message appeared:

    ‘Cannot open self C:\Windows\system32\data\esptool.exe or archive C:\Windows\system32\data\esptool.pkg’

    If there’s anything I can provide (log files, etc) to help, let me know.

    en respuesta a: Metro update v2.7.5 issue #4965
    mike
    Participante

    Hola,

    It took some time, but I was able to install chgport on my computer. I tried running the new Magerit Updater script, and recieved a new message:

    ‘No serial ports were found.’

    I also tried this on my work laptop and saw the same message.

    When plugging in the Metro with a USB, the computers recognise it as a new device, so I don’t know what’s happening – I’m not much of a computer person.

    I will keep trying to see if there’s a way to get the computer to find serial ports. I also see that Microsoft no longer uses chgport (https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chgport) so if you can find a way to update without chgport it would be good.

    Thanks, I do appreciate your time in helping with this.

    en respuesta a: Metro update v2.7.5 issue #4948
    mike
    Participante

    No worries, thank you for your help.

    I’ve tried looking for chgport on my computer, and cannot find it. I will see if I can download a copy from Microsoft, but if not, I will try using my work laptop.

    Mike

Viendo 4 entradas - de la 1 a la 4 (de un total de 4)